ANAMEL PAC TRADING EST.

• MOQ 10000 Roll
• Country of OriginSaudi Arabia
• TypeStretch Film Rolls
• MaterialPP
• CertificationSABER
• LengthCustomized
• ColorBlue, Brown, Purple, Red, Transparent, White, Yellow, Clear
• HardnessSoft
• thicnkess23 micron
• Brand NameANAMEL
• ApplicationMaterial Wrapping
• FeatureStretchable
• TransparencyYes
• Adhesiveno
• Design Printingno
• Plastic ProcessedPP
• Screw DesignN/A
• MOQ1000 Roll
• Product NameStretch film
• UsageMaterials wrapping

50cm width and 23 micron guage which can be supplied with the customers' specification from 1kg roll to 50 kg jumbo roll. Reduces packaging waste against conventional film and increasing the film strength and improving load stability. Pre-stretched wrap excellent for load stability and better performance with lower cost. 30 GAUGE CLEAR AND DURABLE: Thin, stronger, longer and more economical. High performance pre-stretched hand film with excellent puncture resistance. Pallet wraps sticks to itself for a perfect seal. . These stretched films are easy to apply giving you improved productivity, makes wrapping pallets easier and more efficient. There is no need to stretch the film to get maximum load holding as the film has been pre-stretched. 

• MOQ 1000 Roll
• TypePacking Cord
• MaterialPP
• Colorwhite
• Usage/Applicationpackaging, pallet wrapping
• FinishPP
• Size/Dimension13mm, 16mm,19mm,25 mm and 32mm
• Weight+/- 5kg /roll
• Warrantyno
• Accessories Includedno
• Country of OriginMade In India
• Product Namestrap cord for packaging
• MOQ1000
• Made inChina/GCC

Total Length - from 200 - 750mtr. PP Strapping Roll Size: 16mm, 19mm, 25mm & 32mm PP/polyester cord strapping roll is water resistant and does not rust aving smooth edges 850kg Break Strength allows  to be used in many applications - Packaging Strapping

• MOQ 1000 Roll
• Country of OriginSaudi Arabia
• Size100x75-150x75Inch, 25x25-50x25Inch, 50x50-100x50Inch, 5x5-25x25Inch, Customized size
• TypePolyethylene Sheet
• MaterialPolyethylene Plastic
• Thicknessform 10 micron to 500 mic
• ApplicationPackaging, Concrete Pouring and other coverages
• ColorClear
• FeatureEco Friendly, Good Quality, High Strength, Perfect Shape
• ConditionNew
• TextureHard, Soft
• Brand NameABM SAUDI
• Hardnessas per spec
• TransparencyAs per spec
• ColourFiller

Polyethylene sheet It is a plastic sheet made of polymers and ethylene. These sheets find widespread use in various construction and industrial application.   Polyethylene sheets  are made to serve special purpose application, as to use as a Damp-Proof Membrane (DPM) or Vapor-Barrier Membrane (VBM) within building floors, ceilings and walls. Polyethylene sheets benefit construction quality in a number of ways, some which are described below: To be used during building construction to prevent structural damping that occurs when warm, moist air penetrates inside a concrete lab, wall, roof or floor structure reaches the dew point, and then condenses into liquid water. The warm, damp air may penetrate a wall from the inside of a heated buiding in a cold climate or from the exterior of an air-conditioned building in a warm climate. This condensation may allow mold growth, rotting of timber, corrosion of metal components and reduction in the thermal insulation’s effectiveness. The resulting structural damage may occur without visible indications until significant damage has occurred. The most effective method of controlling damping is using an impervious vapor-barrier on the warm side of the structure. It has an extremely low water permeability rating of typically 1.7SI Perms. It can be used in between the insulation material and structure surface to act as a damp-proof membrane. Oversite concrete slabs employ a 1000 guage(250 microns) polythene sheet laid underneath the concrete to prevent the moisture from being absorbed. The general standard employed for the testing and verification of polyethylene sheets for use as a vapor-barrier is the ASTM4397