Epoxy Coatings #2520405

DESCRIPTION. Paintco Roof Coating 223 is a waterproof seamless product which could be easily applied on roofs and on top of polyurethane foams to provide long term protection. Because of its solar radiation reflecting properties, it minimizes the heat transfer from outside to inside of building, thereby reducing air conditioning cost as well as prolonging the life of foam insulation. PHYSICAL DATA.Pigments:Rutile Titanium dioxide and / or color pigments and functional extenders. Colours:White and pastel. (for better reflection of solar radiation).Specific gravity:Approx. 1.30.Solids by volume:Approx. 45%.Thor. Coverage @50 DFT:0.7m /Kg. APPLICATION DATA.Application method:Brush, Roller, Rubber wiper or airless spray.NEW CONCRETE.1- Clean surface thoroughly.2- Apply diluted (4:1)Paintco Roof Coating with water to seal pores.3- Fill minor cracks with sand / Paintco Roof Coating (2:1) mix.4- Apply Paintco Roof Coating 223 undiluted minimum two coats.5-Clean all equipments with water.REMARKS.For wide cracks or movable joints use fabric scrim or 2m polystyrene strip. Although Paintco Roof Coating 223 is a self priming coating in case a separate primer is required then Paintco Latex Primer Sealer 1201 can be used.

DESCRIPTION.Paintco Aseptic Coating is highly resistant to saponification and has excellent durability. After adequate drying, it provides a scuff proof washable surface with excellent semigloss appearance. It may also be used for areas where moisture condensation may occur. Suitable for plaster, drywalls and concrete. Presence of unique germicide makes it specially suitable for painting of hospitals and clinics.PHYSICAL DATA.Pigments:Rutile Titanium dioxide and / or colour.pigments and functional extenders. Appearance:Semigloss.Colour:White.No.of components:One.Specific gravity:Approx. 1.15.Solids by volume:Approx. 25%.Drying time at 30C:1-Dust dry:approx.30 minutes.2-Hard dry:approx.2 hours.3-Recoatability:after 2 hours.Flash point:Nonflammable.APPLICATION DATA.Application method:Airless spray, air spray, brush & roller.Type of Thinner:Water.Percentage of thinner:Airless spray: 5% max. by volume.Air spray:15% max. by volume.Brush & roller:10% max. by volume.Dry film thickness per coat:25 microns.Ther. Coverage at 25 microns DFT:10m2/ltr.Surface Preparation. All surfaces must be thoroughly prepared and clean and should be free from alkali and efforescence, for repair and maintenance, remove damaged and loose paint by mechanical cleaning and dust off.REMARKS.Paintco Aseptic Coating when applied over properly primed surface will provide a smooth crater-free coating. Absence of voids or microholes prevents the growth of bacteria and maintains the surface clean and hygienic. The coating compiles with current air pollution regulations and does nor contain lead or hydrocarbon solvents.

Paintco Roof Coating 223 is a waterproof seamless product which could be easily applied on roofs and on top of polyurethane foams to provide long term protection. Because of its solar radiation reflecting properties, it minimizes the heat transfer from outside to inside of building, thereby reducing air conditioning cost as well as prolonging the life of foam insulation.

Palntco Epoxy Tank Coating I 2 pack (solvent free base is a high build coating developed specially for use as a top coat on concrete tanks or swimming pools and potable water tanks made of concrete or steel. The steel surface should be sandblasted to Sa. 2.5 before application of this coating.

Paintco Epoxy Tank Coating I 2 pack (solvent free base is a high build coating developed specially for lining tanks of mineral oils , petrol, weak acids and alkalis.

Details : It is suitable for tanks made of concrete or steel. The steel surface should be sandblasted to Sa. 2.5 before application of this coating.

Paintco Epoxy Tank Coating I Zpack is a high build coating developed specially for use as a top coat on concrete tanks or swimming pools pretreated with epoxy sealer It can also be applied directly (self priming) on properly blasted metal surface. It dries by cross-linking and the cured coating provides excellent barrier to water, vegetable oils and mineral oils including diesel oil, petrol and weak acid and alkalis.

Paintco Fire Retardant Coating 60 is based on chlorinated rubber and chlorinated plasticiser. Release of chlorine at high temperature combined with fire retarding pigment like antimony trioxide control spreading of fire.

Details : The coating is also resistant to weathering and to splashes of salt water, engine oils and dilute acids which makes it suitable also for printing superstructure cabins of marine vessels. Suitable for application on wood plaster Et steel surfaces under interior and exterior conditions.

Paintco lntumescent is a high performance solvent based fire protection system specially developed to provide enhanced fire resistance to structural steel and woods which requires two hours protection. It is based on special binder combined with highly efficient intumescent pigments and fillers which provide the optimum resistance to fire spread propagation). This unique combination of resin and pigments enables the coating to minimize flame spread in the event of a fire thus restricting the speed at which the fire can be spread.

Paintco Intumescent is a high performance water based fire protection system specially developed to provide enhanced fire resistance to structural steel and woods which requires two hours protection. It is based on special binder combined with highly efficient intumescent pigments and fillers which provide the optimum resistance to fire spread propagation. This unique combination of resin and pigments enables the coating to minimize flame spread in the event of a fire thus restricting the speed at which the fire can be spread.