Riyadh, Saudi Arabia
Write a Review
Our Products
Adhesive & Non-Adhesive Tapes
2 Products availableSeparators & Strainers
1 Products availableFurniture Hardware & Fittings
1 Products availableGates, Fences And Fencing Materials
1 Products availableNuts Bolts And Fasteners
1 Products availableOur offered Product range includes Red Silicone Sponge Sheets, Black Silicone Sponge Sheets, White Silicone Sheets, Translucent Silicone Sheet and Red Silicone Sheets.
Widely used in food, pharmaceutical and other clean industry applications, our White Silicone Sheets is efficient in offering advantages over other forms of elastomers. The White Silicone Sheets, offered by us, is sold in linear meter lengths. It complies with FDA that is Food & Drugs Association as well as with GP that is General Purpose.
Details :
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100 OC and as high as 315 OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200°C intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60° shore and we can offer hardness from 30° to 80° in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting :
Cutting and fabrication service : Gaskets, seals and strip.
Moulded sheet for smaller applications : Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30O to 80O
Adhesive backing : Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service : If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are :
Sheeting : Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion : Solid and Sponge (also available in Fluorosilicone)
Tubing : Solid ONLY
Gaskets : Solid and Sponge
Mouldings : Solid and Sponge (RTF Mouldings)
Compounds : Solid ONLY
Cables : Solid ONLY
Fabric Reinforced Sheeting : Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001248 | 10 | 1200 | 0.5 | 60 | FDA |
| 1001247 | 10 | 1200 | 0.8 | 60 | FDA |
| 1001249 | 10 | 1200 | 1 | 60 | FDA |
| 1001250 | 10 | 1200 | 1.5 | 60 | FDA |
| 1001251 | 10 | 1200 | 2 | 60 | FDA |
| 1001246 | 10 | 1200 | 2.5 | 60 | FDA |
| 1001252 | 10 | 1200 | 3 | 60 | FDA |
| 1001580 | 10 | 1200 | 4 | 60 | FDA |
| 1001595 | 10 | 1200 | 5 | 60 | FDA |
| 1001581 | 10 | 1200 | 6 | 60 | FDA |
| 1001256 | 5 | 1200 | 8 | 60 | FDA |
| 1001257 | 5 | 1200 | 10 | 60 | FDA |
| 1001512 | 5 | 1200 | 12 | 60 | GP |
| 3043115 | 10 | 1200 | 1 | 60 | GP |
| 1001569 | 10 | 1200 | 2 | 60 | GP |
| 1001570 | 10 | 1200 | 3 | 60 | GP |
| 1001253 | 10 | 1200 | 4 | 60 | GP |
| 1001254 | 10 | 1200 | 5 | 60 | GP |
| 1001255 | 10 | 1200 | 6 | 60 | GP |
Additional Information
| Colour | White |
|---|---|
| Material | Silicone (VMQ) |
| Hardness (Shore A) | 60 |
| Maximum Temperature (°C) | 200 |
| Minimum Temperature (°C) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
Fabricated in adherence with Food & Drugs Association as well as with General Purpose, our Translucent Silicone Sheet is comprehensively in demand. We are a credible Supplier of Translucent Silicone Sheet from Saudi Arabia. Silicone Sheet that we offer is used in ample industries namely pharmaceutical, food and other clean industry applications. We have the ability to deliver even the bulk orders within the stipulated period of time. Moreover, for our international clients, we can start exporting our products.
Details :
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100OC and as high as 315OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200OC intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60O shore and we can offer hardness from 30O to 80O in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting:
Cutting and fabrication service. Gaskets, seals and strip.
Moulded sheet for smaller applications. Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30O to 80O
Adhesive backing: Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service. If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are:
Sheeting: Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion: Solid and Sponge (also available in Fluorosilicone)
Tubing: Solid ONLY
Gaskets: Solid and Sponge
Mouldings: Solid and Sponge (RTF Mouldings)
Compounds: Solid ONLY
Cables: Solid ONLY
Fabric Reinforced Sheeting: Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001513 | 10 | 1200 | 0.3 | 60 | FDA |
| 1001610 | 10 | 1200 | 0.5 | 40 | FDA |
| 1001533 | 10 | 1200 | 1 | 60 | FDA |
| 1001539 | 10 | 1200 | 1 | 40 | FDA |
| 1001534 | 10 | 1200 | 1.5 | 60 | FDA |
| 1001551 | 10 | 1200 | 1.5 | 40 | FDA |
| 1001535 | 10 | 1200 | 2 | 60 | FDA |
| 1001590 | 10 | 1200 | 2 | 40 | FDA |
| 1001536 | 10 | 1200 | 3 | 60 | FDA |
| 1001593 | 10 | 1200 | 3 | 60 | FDA |
| 1001537 | 10 | 1200 | 4 | 60 | FDA |
| 1001538 | 10 | 1200 | 5 | 60 | FDA |
| 1001592 | 10 | 1200 | 6 | 60 | FDA |
| 1001557 | 5 | 1200 | 8 | 60 | FDA |
| 1001558 | 5 | 1200 | 10 | 60 | FDA |
| 1001559 | 5 | 1200 | 12 | 60 | FDA |
| 1001550 | 10 | 1200 | 1 | 60 | GP |
| 1001552 | 10 | 1200 | 2 | 60 | GP |
| 1001553 | 10 | 1200 | 3 | 60 | GP |
| 3043203 | 10 | 1200 | 3 | 60 | GP |
| 1001554 | 10 | 1200 | 4 | 60 | GP |
| 1001555 | 10 | 1200 | 5 | 60 | GP |
| 1001556 | 10 | 1200 | 6 | 60 | GP |
Additional Information
| Colour | Translucent |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (°C) | 200 |
| Minimum Temperature (°C) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
We have a strong foothold as Supplier of Red Silicone Sheets from Saudi Arabia. We have tie-ups with the known brands manufacturing them and bring to you a lot that is impeccable on grounds of quality, performance and reliability. The Red Silicone Sheets that we deal in find their usage in food, pharmaceutical and other clean industry applications. The Sheets are obtainable at nominal prices.
Details :
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100OC and as high as 315 OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200OC intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60° shore and we can offer hardness from 30Oto 80O in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting:
Cutting and fabrication service. Gaskets, seals and strip.
Moulded sheet for smaller applications. Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30° to 80°
Adhesive backing: Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service. If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are :
Sheeting: Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion: Solid and Sponge (also available in Fluorosilicone)
Tubing: Solid ONLY
Gaskets: Solid and Sponge
Mouldings: Solid and Sponge (RTF Mouldings)
Compounds: Solid ONLY
Cables: Solid ONLY
Fabric Reinforced Sheeting: Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001514 | 10 | 1200 | 0.5 | 60 | FDA |
| 1001515 | 10 | 1200 | 0.8 | 60 | FDA |
| 1001516 | 10 | 1200 | 1 | 60 | FDA |
| 1001517 | 10 | 1200 | 1.5 | 60 | FDA |
| 1001584 | 10 | 1200 | 2 | 60 | FDA |
| 1001586 | 10 | 1200 | 3 | 60 | FDA |
| 1001587 | 10 | 1200 | 4 | 60 | FDA |
| 1001521 | 10 | 1200 | 5 | 60 | FDA |
| 1001588 | 10 | 1200 | 6 | 60 | FDA |
| 1001523 | 5 | 1200 | 8 | 60 | FDA |
| 1001524 | 5 | 1200 | 10 | 60 | FDA |
| 1001525 | 5 | 1200 | 12 | 60 | FDA |
| 1006230 | 10 | 1200 | 1 | 60 | GP |
| 1001518 | 10 | 1200 | 2 | 60 | GP |
| 1001519 | 10 | 1200 | 3 | 60 | GP |
| 1001520 | 10 | 1200 | 4 | 60 | GP |
| 1001522 | 10 | 1200 | 6 | 60 | GP |
Additional Information
| Colour | Red |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (°C) | 200 |
| Minimum Temperature (°C) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
Complies with Food & Drugs Association, our Black Silicone Sheets is precision engineered and designed with full perfection. We are a reckoned Supplier of Black Silicone Sheets from Saudi Arabia. Our procurement team carefully and deeply analyzes the Sheets and only after full-fledged quality assurance sources them. The Silicone Sheets, owing to its superb hygiene, are used in food, pharmaceutical and many other clean industry applications.
Details :
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100OC and as high as 315OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200OC intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60° shore and we can offer hardness from 30° to 80° in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting:
Cutting and fabrication service. Gaskets, seals and strip.
Moulded sheet for smaller applications. Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30Oto 80O
Adhesive backing: Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service. If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are:
Sheeting: Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion: Solid and Sponge (also available in Fluorosilicone)
Tubing: Solid ONLY
Gaskets: Solid and Sponge
Mouldings: Solid and Sponge (RTF Mouldings)
Compounds: Solid ONLY
Cables: Solid ONLY
Fabric Reinforced Sheeting: Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001526 | 10 | 1200 | 0.5 | 60 | FDA |
| 1001527 | 10 | 1200 | 1 | 60 | FDA |
| 1001528 | 10 | 1200 | 1.5 | 60 | FDA |
| 1001529 | 10 | 1200 | 2 | 60 | FDA |
| 1001530 | 10 | 1200 | 3 | 60 | FDA |
| 1001574 | 10 | 1200 | 4 | 60 | FDA |
| 1001575 | 10 | 1200 | 5 | 60 | FDA |
| 1001576 | 10 | 1200 | 6 | 60 | FDA |
| 1001577 | 5 | 1200 | 8 | 60 | FDA |
| 1001578 | 5 | 1200 | 10 | 60 | FDA |
| 1001579 | 5 | 1200 | 12 | 60 | FDA |
| 1006210 | 10 | 1200 | 1 | 60 | GP |
| 1006211 | 10 | 1200 | 2 | 60 | GP |
| 1006212 | 10 | 1200 | 3 | 60 | GP |
| 1006213 | 10 | 1200 | 4 | 60 | GP |
| 1006214 | 10 | 1200 | 5 | 60 | GP |
| 1006215 | 10 | 1200 | 6 | 60 | GP |
Additional Information
| Colour | Black |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (oC) | 200 |
| Minimum Temperature (oC) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
Sold in linear meter lengths, our Blue Silicone Sheets are made in compliance with the predefined rules of Food & Drugs Association. We are a known Supplier of Blue Silicone Sheets from Saudi Arabia. The Blue Silicone Sheets, provided by us, are duly tested by pour quality controllers in order to provide only defect free products. In addition, for international clients, we are all set to start exporting our Sheets.
Details :
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100OC and as high as 315OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200OC intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60° shore and we can offer hardness from 30O to 80O in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting:
Cutting and fabrication service. Gaskets, seals and strip.
Moulded sheet for smaller applications. Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30Oto 80O
Adhesive backing: Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service. If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are:
Sheeting: Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion: Solid and Sponge (also available in Fluorosilicone)
Tubing: Solid ONLY
Gaskets: Solid and Sponge
Mouldings: Solid and Sponge (RTF Mouldings)
Compounds: Solid ONLY
Cables: Solid ONLY
Fabric Reinforced Sheeting: Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001545 | 10 | 1200 | 1 | 60 | FDA |
| 1001561 | 10 | 1200 | 1.5 | 60 | FDA |
| 1001546 | 10 | 1200 | 2 | 60 | FDA |
| 1001531 | 10 | 1200 | 3 | 60 | FDA |
| 1001547 | 10 | 1200 | 4 | 60 | FDA |
| 1001548 | 10 | 1200 | 5 | 60 | FDA |
| 1001549 | 10 | 1200 | 6 | 60 | FDA |
| 1001597 | 5 | 1200 | 8 | 60 | FDA |
| 1001571 | 5 | 1200 | 10 | 60 | FDA |
| 1001572 | 5 | 1200 | 12 | 60 | FDA |
| 1006220 | 10 | 1200 | 1 | 60 | GP |
| 1006221 | 10 | 1200 | 2 | 60 | GP |
| 3043114 | 10 | 1200 | 3 | 60 | GP |
| 1006222 | 10 | 1200 | 4 | 60 | GP |
| 1006223 | 10 | 1200 | 5 | 60 | GP |
| 1006224 | 10 | 1200 | 6 | 60 | GP |
Additional Information
| Colour | Blue |
|---|---|
| Material | Silicone (VMQ) |
| Hardness (Shore A) | 60 |
| Maximum Temperature (oC) | 200 |
| Minimum Temperature (oC) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
Get in touch with us for acquiring top of the line quality Grey Silicone Sheets! We are a trustworthy Supplier of Grey Silicone Sheets from Saudi Arabia. We are well-equipped with in-house laboratories for quality assurance so as to acquire buyers’ satisfaction by offering flawless products. One can purchase Grey Silicone Sheets from us at cost-effective prices.
Details:
Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures. Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100OC and as high as 315OC. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.
Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200OC intermittent and will remain flexible at low temperatures of -70OC and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.
Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60Oshore and we can offer hardness from 30O to 80O in some instances. Please ring an advisor to check if unsure.
Polymax also offer in Solid sheeting:
Cutting and fabrication service. Gaskets, seals and strip.
Moulded sheet for smaller applications. Colour and hardness variations in small quantity catered for in moulded sheet from 12"x12", shore hardness range 30O to 80O
Adhesive backing: Cut sheet and gaskets can be supplied with a pressure sensitive adhesive.
Colour matching service. If you wish to colour match to silicone sheeting, we offer a service to nearest RAL/ PANTONE colour chart or to sample swatches. Please ask for more information if required.
Other products available in silicone are:
Sheeting: Solid and Sponge in General Purpose, Flame Retardant, High Temperature, Low Combustion (LCH), Ministry of Defence (DTD), Metal Detectable (Solid and Sponge), Soft Silicone, Tough Silicone, Fluorosilicone, Thermo-Chromic, High Tear (HT), Anti-Microbial available in both Sponge and Solid
Extrusion: Solid and Sponge (also available in Fluorosilicone)
Tubing: Solid ONLY
Gaskets: Solid and Sponge
Mouldings: Solid and Sponge (RTF Mouldings)
Compounds: Solid ONLY
Cables: Solid ONLY
Fabric Reinforced Sheeting: Solid ONLY
We will work to your engineering drawings or be happy to liaise on a joint solution. Please ask for a quotation on any or all of the services available if required and can be bought as a 10 metre roll or cut to varying lengths of 1 metre. Colours include; translucent (opaque), white, blue, grey, red oxide and black and come in a range of thicknesses between 0.3mm and 12mm and also varying hardness. Please ring an advisor to check if unsure.
Specifications
| Article No. | Roll Length (m) |
Width (mm) |
Thickness (mm) |
Hardness (Shore A) |
Properties |
|---|---|---|---|---|---|
| 1001541 | 10 | 1200 | 1 | 60 | FDA |
| 1001540 | 10 | 1200 | 3 | 60 | FDA |
Additional Information
| Colour | Grey |
|---|---|
| Material | Silicone (VMQ) |
| Hardness (Shore A) | 60 |
| Maximum Temperature (oC) | 200 |
| Minimum Temperature (oC) | -70 |
| Tensile Strength (MPa) | 9 |
| Elongation at break (%) | 250 |
The White Silicone Sponge Sheets that we deal in are designed and fabricated by experts at our vendors’ end. We are top-notch Supplier of White Silicone Sponge Sheets from Saudi Arabia. Offered by us in ample of densities, our Expanded Closed Cell Silicone Sponge allows number of performance advantages of solid silicone in a softer and more compliant form.
Details :
Polymax Silicone rubber sponge sheet is the preferred choice of medical, pharmaceutical and food processing industries.
Most commercially available silicone sponge products are made from gum based polydimethylsiloxane (PMDS). The polymer is chemically expanded when heat cured to create the closed cell sponge structure. Closed cell means that the cells are non-interconnecting; therefore they do not allow water to wick through the sponge. Generally, silicone sponges have superior mechanical properties and are considered to have a complete closed cell structure.
Expanded closed cell silicone sponge offers many of performance benefits of solid silicone in a softer and more compliant form.
Key Benefits of Closed Cell Silicone Sponge :
Wide operating temperature - silicone sponge has a temperature range of -73oC to 260oC
Water sealing – the closed cell structure allows for good water sealing with relatively low compressive forces.
Compression set resistance – silicone offers excellent compression set resistance (ability to rebound to original thickness), especially at higher temperatures, compared to most rubber material. Low compression set silicone sponges are available for even better performance than general purpose grades.
UV and ozone resistance – silicone products have excellent UV and ozone resistance due in part to their inorganic backbone. This provides long term performance.
Rugged – when silicone is required, silicone sponge parts are more durable than some other products openly available.
Outdoor gasketing – considering all the above benefits, silicone sponge is a good material choice for outdoor environments, from the arctic to the desert.
Typical or common uses of silicone sponge are namely gaskets, cushioning and sealing, but have been known to be used in many other applications.
Polymax silicone sheets are available in 1 metre widths and can be bought in a 10 metre roll or cut to varying lengths of full 1 metre. Colours include; white, red oxide and black and come in a range of thicknesses between 1.5mm and 30mm and also varying densities.
Please ring an advisor if you need more advice on colour options and availability.
Specifications
| Article No. | Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|---|
| 1001644 | 1000 | 1000 | 1.5 |
| 1001600 | 1000 | 1000 | 1.6 |
| 1001601 | 1000 | 1000 | 2 |
| 1001602 | 1000 | 1000 | 2.5 |
| 1001652 | 1000 | 1000 | 2.7 |
| 1001603 | 1000 | 1000 | 3 |
| 1001604 | 1000 | 1000 | 4 |
| 1001605 | 1000 | 1000 | 5 |
| 1001606 | 1000 | 1000 | 6 |
| 1001607 | 1000 | 1000 | 7 |
| 1001608 | 1000 | 1000 | 8 |
| 1001645 | 1000 | 1000 | 10 |
| 1001646 | 1000 | 1000 | 15 |
| 1001611 | 1000 | 1000 | 20 |
| 1001612 | 1000 | 1000 | 25 |
| 1001613 | 1000 | 1000 | 30 |
Additional Information
| Colour | White |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (oC) | 200 |
| Minimum Temperature (oC) | -70 |
| Density (kg/m³) | 250.00 |
| Tensile Strength (MPa) | 1.2 |
| Elongation at break (%) | 200 |
Our company is a reputed Supplier of Red Silicone Sponge Sheets based in Riyadh, Saudi Arabia. The Red Silicone Sponge Sheets offered by us are preferred by various food and pharmaceutical organizations as it is quite clean and highly flexible. We check the sheets on various quality parameters to ensure customer satisfaction. We are capable of delivering bulk orders of Red Silicone Sponge Sheets to clients within the postulated time.
Details :
Polymax Silicone rubber sponge sheet is the preferred choice of medical, pharmaceutical and food processing industries.
Most commercially available silicone sponge products are made from gum based polydimethylsiloxane (PMDS). The polymer is chemically expanded when heat cured to create the closed cell sponge structure. Closed cell means that the cells are non-interconnecting; therefore they do not allow water to wick through the sponge. Generally, silicone sponges have superior mechanical properties and are considered to have a complete closed cell structure.
Expanded closed cell silicone sponge offers many of performance benefits of solid silicone in a softer and more compliant form.
Key Benefits of Closed Cell Silicone Sponge :
Wide operating temperature - silicone sponge has a temperature range of -73oC to 260oC
Water sealing – the closed cell structure allows for good water sealing with relatively low compressive forces.
Compression set resistance – silicone offers excellent compression set resistance (ability to rebound to original thickness), especially at higher temperatures, compared to most rubber material. Low compression set silicone sponges are available for even better performance than general purpose grades.
UV and ozone resistance – silicone products have excellent UV and ozone resistance due in part to their inorganic backbone. This provides long term performance.
Rugged – when silicone is required, silicone sponge parts are more durable than some other products openly available.
Outdoor gasketing – considering all the above benefits, silicone sponge is a good material choice for outdoor environments, from the arctic to the desert.
Typical or common uses of silicone sponge are namely gaskets, cushioning and sealing, but have been known to be used in many other applications.
Polymax silicone sheets are available in 1 metre widths and can be bought in a 10 metre roll or cut to varying lengths of full 1 metre. Colours include; white, red oxide and black and come in a range of thicknesses between 1.5mm and 30mm and also varying densities.
Please ring an advisor if you need more advice on colour options and availability.
Specifications
| Article No. | Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|---|
| 1001614 | 1000 | 1000 | 1.5 |
| 1001615 | 1000 | 1000 | 2 |
| 1001616 | 1000 | 1000 | 3 |
| 1001617 | 1000 | 1000 | 4 |
| 1001618 | 1000 | 1000 | 5 |
| 1001619 | 1000 | 1000 | 6 |
| 1001620 | 1000 | 1000 | 8 |
| 1001621 | 1000 | 1000 | 10 |
| 10016122 | 1000 | 1000 | 12 |
| 1001623 | 1000 | 1000 | 15 |
| 1001624 | 1000 | 1000 | 20 |
| 1001625 | 1000 | 1000 | 25 |
| 1001626 | 1000 | 1000 | 30 |
Additional Information
| Colour | Red |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (°C) | 200 |
| Minimum Temperature (°C) | -70 |
| Density (kg/m³) | 250.00 |
| Tensile Strength (MPa) | 1.2 |
| Elongation at break (%) | 200 |
We are well reckoned as the Supplier of Black Silicone Sponge Sheets from Riyadh, Saudi Arabia. Our Black Silicone Sponge Sheets is sourced from reliable vendors that fabricate them using advanced machinery and in hygienic environment. Our sheets are passed through stringent quality checks before the final delivery. Customers can acquire Black Silicone Sponge Sheets from us at highly affordable rates,
Details :
Polymax Silicone rubber sponge sheet is the preferred choice of medical, pharmaceutical and food processing industries.
Most commercially available silicone sponge products are made from gum based polydimethylsiloxane (PMDS). The polymer is chemically expanded when heat cured to create the closed cell sponge structure. Closed cell means that the cells are non-interconnecting; therefore they do not allow water to wick through the sponge. Generally, silicone sponges have superior mechanical properties and are considered to have a complete closed cell structure.
Expanded closed cell silicone sponge offers many of performance benefits of solid silicone in a softer and more compliant form.
Key Benefits of Closed Cell Silicone Sponge :
Wide operating temperature - silicone sponge has a temperature range of -73oC to 260oC
Water sealing – the closed cell structure allows for good water sealing with relatively low compressive forces.
Compression set resistance – silicone offers excellent compression set resistance (ability to rebound to original thickness), especially at higher temperatures, compared to most rubber material. Low compression set silicone sponges are available for even better performance than general purpose grades.
UV and ozone resistance – silicone products have excellent UV and ozone resistance due in part to their inorganic backbone. This provides long term performance.
Rugged – when silicone is required, silicone sponge parts are more durable than some other products openly available.
Outdoor gasketing – considering all the above benefits, silicone sponge is a good material choice for outdoor environments, from the arctic to the desert.
Typical or common uses of silicone sponge are namely gaskets, cushioning and sealing, but have been known to be used in many other applications.
Polymax silicone sheets are available in 1 metre widths and can be bought in a 10 metre roll or cut to varying lengths of full 1 metre. Colours include; white, red oxide and black and come in a range of thicknesses between 1.5mm and 30mm and also varying densities.
Please ring an advisor if you need more advice on colour options and availability.
Specifications
| Article No. | Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|---|
| 1001627 | 1000 | 1000 | 1.5 |
| 1001628 | 1000 | 1000 | 2 |
| 1001629 | 1000 | 1000 | 3 |
| 1001630 | 1000 | 1000 | 4 |
| 1001656 | 1000 | 1000 | 10 |
Additional Information
| Colour | Black |
|---|---|
| Material | Silicone (VMQ) |
| Maximum Temperature (°C) | 260 |
| Minimum Temperature (°C) | -73 |
| Density (kg/m³) | 250.00 |
| Tensile Strength (MPa) | 1.2 |
| Elongation at break (%) | 200 |
Mohammed Haq (Saudi Anaaf)P.O Box 102255 Riyadh 11675 Hafza Bint Omar Road Opposite Muncipal Office Rawadah, Saudi Arabia
Share us via
