Electrical & Electronic Testing Devices #2598048

The great advantage of the PWR3A compared to many of the other instruments on the market is its simple set-up. In most cases the required parameters must be looked up in tables on the basis of the vector group and the code number of the transformer to be measured, and set up at the instru-ment by means of rotary switches or keys. This often results in a wrong set-up or uncertainty regarding the set-up since some of the tables are confusing.
Such a manual set-up is not necessary with the PWR3A transformation ratio measuring instrument. You simply type in the vector group with the keys. The only thing you have to do is to connect the transformer being off-line to the device and release the measurement; all three phases are measured consecutively, all connecting and short circuited procedures at the primary and secondary volt-age sides are performed automatically before each measure-ment. Of course it is also possible to measure just one phase, e g. H2.

Features :

• Ratio range from 0.75 to 20, 000 (higher ratios with CVT-Ext.)
• Fully automated measurement
• Features market unique Vector Group Detection
• Measuring voltage from 8 V to 230 V
• Measuring voltage up to 5 kV by CVT-Extension: PWR3A-CVT
• Using 3-phase voltage for phase angles other than 0°/180°
• Easy to handle tap changer automatic
• Internal memory stores all dates (Reading with PWR3A-XFER)
• LC display (256 x 128 pixel) with backlight
• Easy input of vectorgroup and measuring conditions
• USB/RS232C port to get full instrument control
• Centronics printer port or build in printer (optional)
• Robust mobile case for field use
• Factory Certificate

The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the user that the locate is beyond the shadow accurate. The vLocPro2 (VLP2) is the tool that will give you the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground. The vLocPro2 (VLP2) series locator is the locator of choice for the contract locating professionals.
The vLocPro2 (VLP2) utility locator receiver has more than seventy active frequencies from 98Hz to 200kHz as well as several passive modes such as broad and narrow band power and VLF radio and SD (signal direction). Once the target line is located use the compass feature to quickly trace the line by following the compass line.

Features :The accessory socket on the vLocPro2 (VLP2) receiver adds the accessory options of - Plug-in A-frame Fault Locator to find cable sheath and pipeline coating faults. Stethoscope Remote Antenna for positively identifying a line where many lines are together.

• More than 40 hours of battery life
• IP54 construction for all weather use
• Ergonomic lightweight design at only 4.6lb/2kg
• Can use with rechargeable or alkaline batteries
• Lightweight rugged ABS & carbon fiber construction
• Link a range of GPS devices to the receiver via Bluetooth
• Free MyLocator2 configuration and fleet management app
• SD (Signal Direction) positive line identification mode for congested areas

Utility location system to detect and trace cable runs and pipe networks. The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible. Easyloc Cable Locator by Megger.
Easyloc is suitable for Water, Rail, Gas, Power, Highways and Telecommunication Utilities and Contractors; Groundworks; Building, Local Authorities, Civil Engineering, Street Lighting, and Fencing, Gardening and Landscaping companies.

Benefits :

• Make optimum preparations for your building work, quickly and reliably
• Avoid cable damage and help to minimise costly accidents and inconvenient delays
• Depth measurement at the push of a button, even without a transmitter
• 33 kHz – compatible with other location systems
• Large display with automatic backlight
• Quick and simple to operate

With our wide connectivity, trustworthy shipping facilities, we are flexible in delivering the product basket to the clientele within the dedicated time. Only high-quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement.