Other Products / Services #2598048

The approved and compact Bagela cable pulling winches are manufactured in the shock-resistant, recovering Terpolymer (ABS) housing. The longevity of the winch aggregate in combination with this housing makes the winch a worth-stable construction machine. The plastic is solid-coloured and available in red, blue, orange and white. Of course it can be painted although.
For operation the soundproofed housing remains closed, only the cover of the control panel has to be opened. The rope speed can be adjusted steplessly and absolutely without jerking from 0 – 100 m/min depending upon type of winch.
The setting of the pulling operation is to be arranged on a user friendly touch screen. The recorded data could be exported via USB or journalised by the provided thermo printer directly at the building site. The winch is powered by a diesel engine with an integrated infinitely controllable, hydrostatic gear.
The whole pulling force is generated by a rope protecting, grooved double capstan system. The chassis is spring mounted and can be approved with 100km/h  for the KW 2000 up to KW 5000 (depending on national road traffic regulations).

KW 5010 and KW 10 in bigger housing :

• Interior free accessible
• Higher rope output speed up to 100 m/min possible
• Higher rope length possible
• Deflection boom optional, stored in swing out holder underneath the housing
• counter-sunk front supports

Technical Data :
Standard design :

• Winch aggregate :
  • PC 310 touch screen, digital recording of pulling force, adjustable pulling force delimiter,
  • odometer with progress bar, speed indicator, thermal printer, USB port, no additional software necessary
  • elapsed hour counter
  • diesel engine with hydraulic gear
  • two single propelled, grooved capstan heads and storage drum with 500 m rope

Housing and chassis :

• Lockable, sound proved ABS plastic housing
• Chassis with overrunning brake, with automatic return, parking brake, supporting wheel and safety hitch, 12 V lightening system und TÜV (Technical Control Board) approval according to German road traffic regulations 100km/h. Aluminium rims
• Backwards extendable  and retensionable rear props
• KW 5010 and KW 10 on a 80 km/h trailer  

Extras : (on request)

• Other type of engines, chassis, paintings and more rope if needed
• Static pull system, (RKW), telescopic deflection boom

The lightest and ultimate in portability…The most advanced multi-parameter, infra red SF6 gas analyser delivering high performance SF6 measurements remotely, bringing interference-free laboratory performance to the field. The Asserolyz-IR™ is the world’s first SF6 impurity gas analyser to combine the following :

Features :

• Innovative Modular Design That Allows The Measurement Of The Largest Number Of Gases Offered In The Market
• Up To 11 Parameters Measured Simultaneously Within 5 Minutes!
• Uses Advanced Infrared Absorption Technology To Measure Sf6, H2o, Hf, R12 And Cf4 In Addition To So2, Co And H2s With Electrochemical Cell, Bringing Laboratory Standard Measurement To The Field
• Fully Upgradeable To Zerowaste® Plus Additional Sensors
• The Lightest - At Just 1.8kg (<4lbs) There Is No Lighter Instrument On The Market, And With An Optional Shoulder Harness And Rechargeable Battery Providing Up To 8 Hours Operating Time, Portability Has Never Been Easier
• The Fastest - Fastest Measurement Cycle With Readings Obtained At Just 5 Minutes Per Test With Only 90 Seconds Of Gas Sample
• The Simplest To Use  - 1 Button Operation, Full Colour Touchscreen With User Friendly Interface, Including 3 User-selectable Methods (Cigre/iec/astm) And 3 Custom Methods – All Via Usb Communication With Data-logging For Up To 1000 Results
• The Most Accurate - Accurate Ir Is Specific With No Cross Interference, No Contamination And No Drift. Delivering Stable, Repeatable Readings The Asserolyz-ir™ Outperforms Any Sf6 Gas Analyser
• With Less Sf6 Waste - Minimal Gas Usage During Operation – Less Than 1 Litre (250cc)
• Leak Seeker Option - Offering An Optional Sf6 Leak Detection Module (Audible) Probe Type, With An Operating Temperature Range Of -20ºc To +50ºc, (-4ºf To +122ºf) Gas Flow Of 300ml/min, And Input Gas Pressure Of Up To 10 Bar, This Analyser Is Unrivalled In Every Way
• Giving The Best Overall Performance - The Asserolyz-ir™ Provides The Most Comprehensive Analysis Of Any Analyser Available In The Industry.

Benefits :

• Effective Controls On Sf6 Inventory And Usage
• Accurate Monitoring And Transparency Of Information
• Improved Handling Practices And Standards
• Compliance With Regulation
• Enhanced Safety
• Maximum Asset Utilisation
• Minimum Environmental Impact
• Reduced Maintenance Costs

The connection of the expanding renewal energy e.g. offshore wind parks demands a massive net extension. Instead of overhead lines, high-voltage cables with large conductor cross-sections are laid in the ground. In order to avoid cable joint boxes the cable manufacturers produce the greatest possible lengths and supply the cable only on broad drums what means the laying with conventional trailers could not be managed.
Cable Drum Transport and Laying Trailer BTT 130.80V could be extended hydraulically. The air suspension enables the laterally lowering of the trailer to adapt to angular standing drums on difficult ground. The U-type design of the trailer, open at the rear, enables the mounting of a different triangle towing bar in which the hydraulic cylinders for the widening function are implemented.

• Simple extending operation of the trailer and the drum drive via the own hydraulic system
• Just secure in the required width with the locking bolts, ready
• The drum axles in the suitable length are fixed at the trailer

The world’s most advanced SF6 Analyser… bringing the laboratory to the field.

The Zerowaste® is the world’s first SF6 impurity gas analyser to combine the following features :

• Simultaneous SF6 measurement of up to 11 parameters
  • Uses Advanced Infrared Absorption Technology To Measure Sf6, H2o, Hf, R12 And Cf4 In Addition To So2, Co And H2s With Electrochemical Cell, Bringing Laboratory-standard Measurement To The Field
  • Fully Battery Operated (Minimum 8 Hours) Even During Gas Pump Back
  • Automatic Sampling Of Up To 5 Sequential Measurements
  • Automatic Pump Back For Sampled Gas (User-selectable)
  • Automatic Start Of Measurement Upon Detection Of Gas Connection (User-selectable)
  • Minimum Amount Of Gas Drawn Of Typically 250cc Per Measurement Cycle
  • Time Programmable Moisture Purge For Highest Quality H2o Measurement
  • Fully Upgradeable – Easy Addition Of More Sensors
  • Innovative And Patented Modular Design That Allows The Measurement Of The Largest Number Of Gases Offered In The Market
  • Optional Sf6 Leak Detection Probe
  • Full Colour Touchscreen Display With User Friendly Interface
  • Data Logging
  • User-selectable Methods To Display Compliance With Different Industry Standards Including Iec/cigre.

This has been made possible by utilising some of the best experience and knowledge in gas sensing, spectroscopy and product design and an extensive knowledge of the SF6 impurity market.

Performing field test measurements of Current and Potential Transformers has been made far simpler with the Model 590J-V2.
This full featured product combines all of the metering CT test abilities of the popular 590G-V2 model with the additional advantage of also being able to perform both protection CT excitation tests as well as burden based inductive PT tests.
The 590J-V2 eliminates the need for additional bulky accessories usually required to perform various tests on different types of equipment, saving the operator valuable time and money.
Light weight and portable, the 590J-V2 is housed in a ruggedized plastic case and is supplied with the necessary test cables and attachment accessories. It is further packaged in a foam lined transit case for safe transport.

It features the following offline test capabilities :

• Burden based CT and PT ratio and phase error measurements to an accuracy of 0.02%
• Excitation measurements of Protection Class CTs
• Optional Live CT test capability with 590F accessory
• CT and PT secondary winding resistance, PT primary included
• CT 1.6 kHz Admittance test
• Simulated Full Load inductive PT testing on up to 2 windings with or without Junction box
• CT and PT Burden test
• CT and PT polarity check
• Batch testing of metering CTs
• No name plate CT Class Estimation
• Record download to USB Flash or optionally via Bluetooth to an Android tablet or phone.

This full featured CT and PT test instrument lowers testing costs by being simple, fool-proof and fast. It's capabilities allow utility personnel and test technicians to pursue the very important task of testing field based instrument transformers for measurement losses, faults or tampering.

The Correlux C-3 is suitable for both immediate measurement (online) as well as night measurement (offline). If the measuring point is easily accessible and is not in a danger area, then online measurement comes into effect. Power transmitters are deployed in this case (transmitter and microphone). These transmit the live signal directly to the correlator and you receive the result immediately. However, if the measuring point is in an area which is difficult to access or if there is lots of interference, then you have the option to conduct an offline measurement using the power transmitters or up to 8 multi-sensors. The multi-sensors are programmed accordingly with the correlator and then deployed. Following the measurement the power transmitters and multi-sensors are collected in and the data can be read and evaluated by the correlator. With the aid of pinpoint location you can now determine the exact position of the leak, either with the multi-sensors or with a PAM W-2 ground microphone. Both options can be carried out using the Correlux C-3; no other devices are needed. The correlator housing is light and easy to handle. The touch display also makes it easier to use and improves the readability. The system is charged in the transport case supplied using wireless inductive charging. This means that only one charging cable is needed for the complete charging of all devices.

Raytech Digital Winding Resistance meter WR100-12R is the enhanced version winding resistance system with a most advanced demagnetizing circuit as a rack version. It is designed for high degree of accuracy for the measurement of very low resistance of any inductive loads.
Unique Measuring Technique - This newly designed technique of measurement incorporates a high precision measurement circuit, a unique power source and the fastest discharge unit on the market.
Operation - The WR series of instruments apply a preset current level, selected by the user, from 0.025A to 100A . The results are reported on the easy-to-read color LCD display and can be stored or printed.
Advanced Protection - Upon powering on the system initializes itself with a self-calibrating, circuit checking sequence. If any problem is detected during initialization or operation, the operator immediately will be notified. The system constantly monitors the condition when turned on. The WR series have extensive protection built in to the circuitry. This is one of the many reasons we can extend our warranty to 2 years.

Features :

• Highest Accuracy and Precision of any high current test system
• Automatic measurements of Low Resistance from 0.00µΩ  .100kΩ
• Demagnetizing Circuit (Advanced design)
• Microprocessor based system with internal storage for over 10000 test results
• Data exchange via USB-Key or USB / RS Connection
• Storage and Printing of test results with an external printer while the test system is measuring
• Complete automatic calibration system and system diagnostics
• Temperature channels with automatic resistance correction
• Standard USB 2.0 & RS232 (serial) Interface
• Pure filtered DC Power source for the highest accuracy readings
• Automatic, high efficiency cooling system to dissipate internal heat
• Automatic shut off for over-temperature condition
• Color LCD with backlighting and touch screen
• Panel mounted Emergency Stop Switch
• 19" rack-mounting casing
• Fully automatic cooling curve analysis (option AHRT 01)
• Fastest discharge time in the market
• 2 Year standard warranty

Specification :

• Model - WR100-12R
• Size L - 490 mm (19.3”) W - 436 mm (17.2”) H - 310 mm (12.2”), Rack Unit - 7U
• Weight 21.9 kg (48.3 lbs.)
• Input Power 90 to 264 VAC (3 kW max.), 47.63 Hz, automatic ranging
• Output Voltage 0 to 50 V DC
• Test Current user selectable - 25 mA . 100 A
• Color LCD with back lighting and touch screen
• Front Panel Sealed, Anodized
• Interfaces - 4 USB 2.0 full speed (3 host, 1 device) and 9 Pin RS232 serial
• Memory Storage Internally stores more than 10 000 test results
• Temperature Operating –10°C to +60°C, Storage –20°C to +70°C
• Resistance Range - 0.00 µΩ to 100 kΩ
• Inductance Range - 0 Henry to 1500 Henry
• Temperature - Operating -10°C to +60°C
• Storage - -20°C to +70°C

We have hired quality auditors who keep a strict check on the quality of the raw materials and also check the inputs against varied quality parameters before procuring them. Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries.

Features :

• 0-30kV (KV30-100) or
• 0-50kV (KV50-100) output voltage
• 3kVA (KV30-100) or
• 5kVA (KV50-100) output capability
• Key operated supply switch to prevent unauthorised operation
• Dual overload protection
• Variable electronic trip – 10-110% of rated output
• Voltage and current metering
• External interlock circuit
• Zero-volt interlock
• Visual indication of test piece failure

Instrument Features :The KV30-100 and KV50-100 are high power, high voltage ac test systems designed for insulation testing. These systems are equally suited to both development and routine testing of electrical insulation systems and plant. The equipment consists of a control unit and a separate oil filled high voltage transformer, linked by 5 metre supply and control cables. The control unit is fitted with a comprehensive range of facilities for control, metering and protection. The output voltage and current are displayed on large, linear analogue instruments, and a variable electronic trip is provided, allowing the trip current to be set to 10-110% of rated output. The high voltage transformer is housed in an oil-filled steel tank fitted with swivel castors for mobility. The units use a high voltage bushing for the HV output, and the other end of the HV winding is earthed. Both the KV30-100 and KV50-100 are equally suited to testing capacitive, resistive or inductive test objects. If higher voltage or output power is required, please refer to our KV50-200/KV100-100 data sheet, detailing our 10kVA high voltage systems.

Supplied Accessories :

• Supply lead
• Spare fuse set
• Operating manual
• Earth lead

Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Secondary Current Injection Test Set. We have massive warehouse with Individual stock keeping units (SKUs). We are capable of sorting the products in an efficient way and can easily entertain bulk requirements of the customers.

Features :

• Wide range of output currents.
• AC and DC voltage outputs.
• All outputs continuously variable.
• Output current metering from 40mA-200A.
• Automatic switch-off in all modes of operation.
• Multi-function timing system.
• Suitable for testing thermal devices.
• Compact and highly portable.
• Voltage and current outputs available simultaneously.

Instrument Features :

• The 100A/E Mk3 secondary current injection test set has been designed to give the maintenance and commissioning engineer a large number of facilities in one self-contained instrument.
• The unit is portable, compact and simple to use. The mains supply for the unit is either 240V ±10% or 115V +10% -6% at either 50 or 60Hz.
• Full load can be obtained at the supply voltage extremes. The current and voltage outputs are independently controlled and metered. The output current and voltage are displayed on large, clear panel instruments. An additional four range CT is provided, extending the ammeter range down to 0-100mA.
• All of the outputs are fully isolated by means of double wound transformers.
• The timing system on the 100A/E is very flexible, without compromising ease of use. Four modes of operation and two contact inputs are provided allowing for a wide range of events to be timed. Both contact inputs automatically select for normally open or normally closed contacts. Operation of the different timing modes is described below.
• Internal start mode starts the timer when the “on” push button is pressed, and stops the timer when the first contact set changes state. This mode is ideally suited to timing over-current relays.
• Single contact mode starts and stops the timer on the first and second changes of state of the fist contact set, and dual contact mode starts the timer from the first set of contacts and stops it from the second set. These modes allow reset and re-close times of protective devices to be easily measured.
• The final mode of operation of the timer starts the timer when the current exceeds 20% of the selected metering range, and stops it when the current falls below 20%. This allows the timing of trips with no auxiliary contacts such as miniature circuit breakers.
• Automatic control has been provided such that all outputs can be switched off once the device under test has operated. The automatic control can be switched in or out of circuit for all outputs, enabling setting up procedures to be carried out.
• The instrument is housed in a robust case complete with a protective cover and fold away carrying handles.

Supplied Accessories :

• Operating manual
• 2m mains lead
• Non-latching contact lead
• 100AL lead set
• Spare fuse set

Optional Accessories:

• 100ADM-F
• Features Forces test current to a sinusoid Greatly improves timing accuracy when testing electromechanical relays Wide range of test currents High overload capability 50/60Hz operating frequency High efficiency.

Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Three Phase Meter Test Station. We are flexible enough in meeting the ever-evolving requirements of the customers as we have well-structured and capacious storage space. We efficiently keep stock of products in diverse grades and stipulation. Three phase electricity meter test bench with extremely compact design size and light weight for simultaneous and automatic testing of 4 eletricity meters.

In co-operation with the users, a completely new, unique test van concept was developed, the Centrix. Incorporated in this absolutely unique concept are the requirements and field experiences of the daily work of the users.

This resulted into a test van concept, which sets new benchmarks :

• Fully automatic measurement and recognition of parameters
• Automatic storage and protocolling
• Central control of all system functions
• Integration of the seven important and innovative prelocation methods
• Highest safety standards
• easyGO operation concept

All Procedures are managed by a single button jogdial operation. Most of the operational steps are automatically pre-selected by the system. The user can fully concentrate on his task, the fault location.

The Micro Ohmmeters – RMO series instruments are designed for contact resistance measurement of non-inductive test objects. RMO instruments are based on state of the art technology, using the most advanced switch mode technique available today. RMO generates a true (ripple free) DC current with automatically regulated test ramps. During the test RMO ramps with increasing current before measuring and decreasing current after the measurement. This approach eliminates magnetic transients.
With over 15 Years in designing and manufacturing Micro Ohmmeters, DV Power has established wide range with 18 models of high-precision micro ohmmeters.

Applications :

• Power circuit breakers (including dead-tank circuit breakers)
• Disconnecting switches
• Interrupters
• Bar installation
• Cable splices
• Welded joints
• Groundings

The next generation in cable diagnosis :Network operators can now get faster and significantly more reliable information about the quality and the condition of their cables. This is made possible thanks to the brand-new 50 Hz Slope Technology. For the first time, it has become possible to immediately locate faults in underground cables during the actual PD measurement.
With the 50 Hz Slope Technology for the first time worldwide a withstand test with VLF cosine-rectangular voltage (VLF CR) and PD diagnosis with damped alternating voltage (DAC) is combined in one unit.
This allows an efficient and integrated solution for precise inventory of the network infrastructure. The important fact here is that the PD measurement data, gained with the VLF CR or with the DAC test voltage, can be compared directly with the 50 / 60 Hz networkvoltage.

Special features :

• Two proven voltage wave shapes in one device
• Standard compliant VLF cable testing with accompanying PD diagnosis
• Non-destructive PD diagnosis by means of proven DAC voltage
• 50 Hz Slope Technology for a direct comparison with the power frequency