Paints #2520405

DESCRIPTION:Paintco Anticarbonation Paint is outstanding waterborne, low odor, top quality paint based on acrylic polymer. It has been formulated to confer long term protective and decorative properties to concrete and masonry surfaces. The micro porous structure of the coating acts as a barrier to the ingress of chlorides and carbon dioxide and other acid gases. The elastomeric nature of anti carbonation paint ensures good crack bridging properties in case of structural movement.It is ideal for interior and exterior application. It can be used for new and existing concrete and masonry structures require protection from water, carbon dioxide, Sulphur dioxide, oxides of nitrogen, chlorides, sulphates and UV radiation. It has excellent weather resistance properties, protects substrates from carbonation, easy to clean and non-toxic.PHYSICAL DATA:Appearance:semi-matt.Colours :White and colors(see our colors card or NCS colors.Specific gravity:Approx. 1.20.Solids by volume:Approx. 40 % .Drying times at 30oC:1-Dust dry:approx. 60 minutes.2-Through dry:approx. 8-10 hour.3-Recoatability:after 10 hour.Flash point:Nonflammable. APPLICATION DATA:Application method:Brush, shortnap roller & spray.Type of thinner:Sweet Water.Percentage of thinner:20% max. by volume.Dry film thickness per coat:30 microns.Ther. Coverage at 30 mic. DFT:13.33m2/litre.Scrub resistance:over 2500 cycles. Surface Preparation:The surface should be free from grit, dirt and grease. Fill hairline cracks and minor voids with Paintco Stucco Putty 2241 ME, Or Paintco Magna Wall Filler 10000 (For interior surfaces) and Paintco Magna Spray Plaster Putty XL 20000 (for exterior surfaces).Sand with sand paper lightly and thereafter apply Paintco anticarbonation sealer, thinned with water. For repair and maintenance, remove damaged and loose paint by mechanical cleaning and dust off.Clean all tools with water immediately after use.The practical spreading rate may vary, depending on the porosity and roughness of

DESCRIPTION :Paintco AFNOOR is a prestigious and attractive decorative finish for interior design. featuring an extraordinary brilliance derived from glowing and precious crystals; with some other pigments that give an elegant, charming and diamond effect It is waterborne product exhibiting good washability and color stability.PHYSICAL DATA :-Appearance:glowing diamond effect.colors:as per catalog.Specific gravity:Approx. 1.35.Solids by volume :Approx. 48 %.Drying times at 30oC:1-Dust dry:approx.30 minutes.2-Full dry:approx.24 hours.Water Resistant:Passes 7 days ASTM D 870.Flash point:Nonflammable. APPLICATION DATA :Application method:special trowel.Type of thinner:Water.Percentage of thinner:not recommended. Dry film thickness per coat:125 microns.Theor. Coverage at 250 microns DFT:1.90 m2 / liter.Surface Preparation: All surfaces must be thoroughly prepared and clean and should be free from alkali and efflorescence. For repair and maintenance, remove damaged and loose particles mechanically and dust it off.Application Method : 1-prepare the surface properly and apply one coat of paintco latex primer sealer 1201 or paintco alkali resistant primer 1202.2-apply one or two coats of paintco stucco putty 2241 or paintco wood and wall putty 2008.3-apply one coat of AFNOOR primer.4-apply two coats of paintco AFNOOR by using special recommended trowel and give enough time for each coat to dry completely.5-Shadows and special effects can be generated by passing the trowel on the final coat while it is wet.The above information is based on our practical experience, given in good faith. It does not constitute a guarantee for individual application because the application and handling in each case lie control. We can not accept responsibility or liability for any damage also connection with the use of the product relative to coverage performance or injury.

DESCRIPTION.Paintco Magnatex Structure Fine is a novelty coating designed for giving grandeur to individuals house held property and is suitable for both interior and exterior concrete and plaster surface. It is an air drying coating devoid of lime and cement.A commendable feature of this product is that it gives high film thickness per coat without any cracking problem under sever climate conditions. Longevity of this coating coupled with labour saving application are the outcome of effective combination of its constituents.PHYSICAL DATA.Pigment:Rutile titanium dioxide and /or colour.pigments and functional extenders.Appearance:Flat, fine texture finish.Colours:White and Colours (on request).No.of components:One.Specific gravity:Approx. 1.72.Solids by volume:Approx. 62%.Drying time at 30C:1-Dust dry:approx.4 hours.2-Hard dry:approx.24 hours.3-Next coat:after 12 hours.(Depending upon thickness applied).Flash point:Nonflammable.APPLICATION DATA.Application method:Low pressure hopper gun.Type of thinner:Fresh Water.Percentage of thinner:5% max. by volume.Spray Data:Hopper Gun:5-7mm Nozzle size, air pressure:3-4bar.Theoretical Coverage:0.6 0.8 Kg / M(depending on surface profile and desire structure).Special pressed pattern can be achieved by using plastic roller before the sprayed coating dries completely).Surface Preparation. All surfaces must be thoroughly prepared and clean and should be free from alkali and efforescence, for repair and maintenance, remove damaged and loose paint by mechanical cleaning and dust off.REMARKS.Paintco Magnatex Structure Fine provides an ideal decorative finish to precast concrete areas. It is suitable for application on gypsum board and plaster. Especially developed for humid climate areas, providing long life without maintenance. For better coverage apply one coat of Paintco Latex Undercoat 1222 in place of Paintco Latex Primer Sealer 1201 . Application details regarding airless spraying are available upon request. A coat o

DESCRIPTION. Paintco stone finish is a long lasting & well designed uniqueness coating based on pure acrylic, giving natural stone effect made from natural color aggregates/stones (non toxic and UV resistant) to the exterior walls.A commendable feature of this product is, of excellent durability and weather ability. It resists alkali and atmospheric pollutants and harsh climatic condition of Middle East. Longevity of this coating is enhanced by over coating of paintco aliphatic polyurethane matt clear.PHYSICAL DATA. Pigment:color aggregates and functional extenders.Appearance:Flat texture.Specific gravity:Approx. 1.75-1.80.Solids by volume:Approx. 68%.Drying times at 30oC:1-Dust dry:approx.1hour.:2-Hard dry:approx.24hours.Flash point:Nonflammable.Water resistance:passes 7 days (ASTM D870).Color retention:excellent (no color change).Weather resistance:passes (ASTM G-53).Recoating time:with the same material after 8-10 hours.APPLICATION DATA.Application method: hopper gun (keep the gun a distance of 60-70cm from the substrate and apply a thin coat to cover the substrate. Again apply second coat with reduced air pressure to get the desired texture.).Type of Thinner:Sweet Water.Percentage of thinner:10-15%. by volume.Theor. Coverage:0.24 square meter/ Kg.(Depending on surface condition and desired structure).SURFACE PREPARATION:All surfaces must be thoroughly prepared , clean and should be free of alkali and efforescence, for repair and maintenance, remove damaged and loose paint by mechanical cleaning and dust off.Recommend to be used over paintco stone primer.REMARKS. Paintco stone Finish is ideal for exterior application, where a imitation to stone effect finish is required. It is also suitable for application on gypsum board, plasters, block works, masonry concrete cement. A coat of paintco aliphatic polyurethane /2pk matt clear is recommended. This will help to minimize dust collection and gives excellent color retention to the coating under exterior ex

DESCRIPTION.Paintco Satin Finish is a lustrous coating which eliminates eye-straining glitter of glossy coatings as well as dull matt appearance of flat finishes.Secondary flow characteristic of polymer present in this product promotes flow and leveling to ensure opacity smooth surface and also sag free appearance.Stain resistance and sheen are optimized and combined with durability under interior and exterior conditions when applied over suitably primed cement, plaster, wood and steel.PHYSICAL DATA.Pigment:Titanium dioxide and /or colour.pigments and functional extenders.Appearance:Semi gloss/Eggshell.Colours:White and colours.No. of components:OneSpecific gravity:Approx.1.25.Solids by volume:Approx.47%.Drying time at 30C:1-Dust dry:approx.2 hours.2-Hard dry:approx.10 hours.3-Recoatability:overnight.Flash point:39oC.APPLICATION DATA.Application method:Air spray, airless spray , brush and roller.Airless spray data:Nozzle 0.013, pressure 150kg /cm2.Type of thinner:Thinner No. 211.Percentage of thinnerAirless spray:3%max.by volume.Air spray:15 %max by volume.Brush & roller:5% Max.by volume.Dry film thickness per coat:30 microns.Ther.coverage at 30 mic. DFT:15.6 m2 / litre.Priming coats.For cement and plaster surfaces : Paintco Latex Primer Sealer 1201.For ferrous metal : Metal Primer 3010.For nonferrous metal a suitable Metal Primer after pretreatment with Etch Primer / 2pack 3255.For wood surfaces :Paintco Wood & Wall Primer 1333.Clean tools with thinner No. 211.Airless spray information is for guidance only and subject to adjustment.

Paintco Tennis Court Paint is vinyl chloride copolymer based floor paint and is abrasion resistant coating suitable for application over concrete and wooden floors. It can be used for internal and external floors, parking areas and ideally suitable for tennis courts. The coating is highly resistant to hot sun, rain and mild household chemicals. Full cured coating is able to withstand constant traffic and scuff of shoes.

Paintco Swimming pool paint is based on chlorinated rubber plasticizer. It is ideally suited for painting concrete swimming pools. The coating is unaffected by water, chlorine and salt. It also prevents growth of algae and fungus. It is a self priming product.

Paintco spray paints are purely based on acrylic resins and it is a combination of tailor made pigments, solvents, additive and propellant. This covers vvide range of general purpose application, exterior interior, on site painting, maintenance and touch up jobs

Details : It is quick drying, high gloss and bright color quality. It is worth saving and contains plenty of paint.